x64 Bitcoin 64 bit download - x64 - X 64-bit Download

Marketplace for Microsoft software

The softwaresales subreddit is intended for **buying** and **selling** software.
[link]

QuarkCoin Cryptocurrency

Quark is a decentralized digital monetary system. It facilitates sending Quarks to Friends, Family Members Online Payments free of charges and charge-backs. Military Grade Encryption. No Bank or Government Control. Quark coins are based on the original idea of Bitcoin but improved, more secure, faster transaction times and zero fees. With improvements to design and security. There is also a greater coin supply with higher block rewards for miners. Quark is fully Open Source.
[link]

LazyMan

STOP DMing US TO GET IN! IT'S OVER! **SERIOUSLY, LAZYMAN IS DEAD** https://www.youtube.com/watch?v=UkHSmDxX1t4
[link]

Updated binaries for Bitcoin Unlimited for Linux 32 and 64 bits have been uploaded (1.0.1.2). Download link in the post. /r/btc

Updated binaries for Bitcoin Unlimited for Linux 32 and 64 bits have been uploaded (1.0.1.2). Download link in the post. /btc submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Microsoft Windows Server 2012 Datacenter 64 bit key is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/download-software/microsoft-windows-server-2012-datacenter-64-bit-key/

Microsoft Windows Server 2012 Datacenter 64 bit key is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/download-software/microsoft-windows-server-2012-datacenter-64-bit-key/ submitted by duetschpire to cryptothrift [link] [comments]

How to run Bitcoin Core 0.20.0 on Ubuntu Server 20.04 LTS using a Raspberry Pi 4 (or Virtual Machine)

I was helping someone on twitter with this so I figured I'd share the information here as well so that other people would have an easier time than I did.
I'm going to explain how to do this setup on a Raspberry Pi, but note that this should work on a VM as well. You can also set up and run the node headless this way, but I will be explaining how to set up the node using a monitor that you can then later disconnect and access remotely once everything is setup.
Hardware:
-Raspberry Pi 4 (2GB RAM minimum) preferably 4GB RAM -Raspberry Pi 4 Heatsinks -Raspberry Pi 4 case -Micro HDMI cable -USB-C power cable and wall adapter -Monitor -Keyboard and mouse -Ethernet cable (Optional) -16GB or larger microSD card -500GB or larger external hard drive (SSD or portable)
Node Requirements: -50 KBps upload internet speeds (Most people should have this) -Unlimited or high data cap internet download/upload service -6 hours or longer per day dedicated run time
Okay, once you have the hardware its time to get started!
The first thing you'll need to do is install the Raspberry Pi imager, this is how we're going to install Ubuntu onto our Raspberry Pi. After your download and install finishes, open the imager.
  1. Click the "choose OS" box and from the list select Ubuntu, then select Ubuntu Server 20.04 LTS (Raspberry Pi 2/3/4).
  2. Insert your microSD card to your computer directly or via a USB converter. Click "choose SD card" and select your inserted microSD card.
  3. Click "Write" and wait for the imager to finish flashing the OS onto your card
When it is done, remove the SD card and reinsert it to access the files installed. You can choose the overclock the Raspberry Pi by editing the config file. To connect to the Raspberry Pi remotely, you'll need to create an SSH file. If you're on windows this is pretty easy. In the File Explorer, highlight the address bar at the top, erase the text and type cmd, press enter and the Command Prompt will pop up. Type the following:
echo\ssh
This will create an SSH file in your SD directory so that you can remote access the Rasberry Pi later. Now you can go ahead and eject the SD card from your computer.
Now we can set up the Raspberry Pi
Go ahead and connect all your peripherals to your Raspberry Pi, insert the microSD, and connect it to power to turn it on. Give it a moment to boot up, then when prompted enter "ubuntu" for the password. It will make you change the password. Afterward, it will print a bunch of information to the screen, write down the IPv4 address, this is the IP address you'll use to remote access the Raspberry Pi. Now, at any time you can remote access your Raspberry Pi by entering a terminal on another PC in your network and typing:
ssh [email protected](your IP address)
The next step is to install a desktop. There are plenty to choose from so feel free to use a different one than what I use, you can also choose to ignore this and to just work from in the terminal from this point forward.
You need to update all the repositories so type: (Note you'll either have to be connected by ethernet or have edited the network-config file to setup your wifi in advance)
sudo apt-get update
Once it's done updating type the following to upgrade your system:
sudo apt-get upgrade
Now that you're up-to-date, you can install the desktop using the command:
sudo apt-get install ubuntu-gnome-desktop
This will take a while to download and install so just sit back and let it do its thing. Once it's done downloading, restart your Raspberry Pi and log in with the password you changed earlier. Your first boot may take a while so just be patient, don't freak out if you see a single purple square in the center of the screen while it's loading. You should now have the Ubuntu desktop ready to go and now it's on to installing Bitcoin Core!
Installing Bitcoin Core 0.20.0
Since we're running Ubuntu Server 20.04 LTS, it should come preinstalled with the Snap Store. This makes installing apps very easy and works similar to pip install in Python. Simply open your terminal and type:
sudo snap install bitcoin-core
This will install Bitcoin Core into your Snap folder and will add the application to your system. Unfortunately, there are still a few steps left before we can begin downloading the blockchain. By default, Bitcoin Core doesn't have the removable-media Plug connected to the Socket. You can view this by typing:
snap connections bitcoin-core
This means when you try installing everything onto your external hard drive, Bitcoin Core won't be able to identify it or write to it even when passed the directory path. To fix this first locate your Snap folder, make a copy of the bitcoin-core folder inside, and paste it into your external drive.
NOTE: You must make a copy, you can't just move the snap file to the external drive.
Now, you can connect the removable-media Plug to the Socket by typing:
sudo snap connect bitcoin-core:removable-media :removable-media
This gives you the read/write permissions necessary to access the /media path. Finally, you can now launch Bitcoin Core and select "use a custom directory path" when prompted. Highlight the current directory path and replace it with the path to your external hard drive, it should look something like this:
/media/(external drive)/bitcoin-core/common/.bitcoin
This is why we had to make a copy of the bitcoin-core folder to the external drive earlier, the Bitcoin Core application will create the new data directory through ".bitcoin". Hit "Okay" and the application will begin synchronizing with the network! Once the synchronization is finished your very own node will be up and running!
EDIT: (08/01/2020) Bitcoin Core 0.20.01 has been released, I will update the tutorial soon with how to run the latest release.
submitted by Noblefire_62 to Bitcoin [link] [comments]

PDQ Deploy packs v72.0.0 (2020-09-18)

Background

This is v72.0.0 (v71.0.0, v70.0.0, v69.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.25 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.012.20041
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.433 (Chrome)
  • Adobe Flash Player v32.0.0.433 (Firefox)
  • Adobe Flash Player v32.0.0.433 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.50.0
  • Gimp v2.10.20 (x86)
  • Google Chrome Enterprise v85.0.4183.102
  • Google Chrome Enterprise v85.0.4183.102 (x86)
  • Google Earth Pro v7.3.3
  • Java Development Kit 8 Update 261
  • Java Development Kit 8 Update 261 (x86)
  • Java Development Kit 11.0.7
  • Java Runtime 8 update 261
  • Java Runtime 8 update 261 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v7.0.1
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v80.0.1
  • Mozilla Firefox v80.0.1 (x86)
  • Mozilla Firefox ESR v68.12.0
  • Mozilla Firefox ESR v68.12.0 (x86)
  • Mozilla Thunderbird v78.2.2 (x86) (customized; read notes)
  • Notepad++ v7.8.9 (x86)
  • Pale Moon v28.13.0
  • Pale Moon v28.13.0 (x86)
  • Spark v2.9.2 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.11
  • WinSCP v5.17.7 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to sysadmin [link] [comments]

PDQ Deploy packs v72.0.0 (2020-09-18)

Background

This is v72.0.0 (v71.0.0, v70.0.0, v69.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.25 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.012.20041
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.433 (Chrome)
  • Adobe Flash Player v32.0.0.433 (Firefox)
  • Adobe Flash Player v32.0.0.433 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.50.0
  • Gimp v2.10.20 (x86)
  • Google Chrome Enterprise v85.0.4183.102
  • Google Chrome Enterprise v85.0.4183.102 (x86)
  • Google Earth Pro v7.3.3
  • Java Development Kit 8 Update 261
  • Java Development Kit 8 Update 261 (x86)
  • Java Development Kit 11.0.7
  • Java Runtime 8 update 261
  • Java Runtime 8 update 261 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v7.0.1
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v80.0.1
  • Mozilla Firefox v80.0.1 (x86)
  • Mozilla Firefox ESR v68.12.0
  • Mozilla Firefox ESR v68.12.0 (x86)
  • Mozilla Thunderbird v78.2.2 (x86) (customized; read notes)
  • Notepad++ v7.8.9 (x86)
  • Pale Moon v28.13.0
  • Pale Moon v28.13.0 (x86)
  • Spark v2.9.2 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.11
  • WinSCP v5.17.7 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to pdq [link] [comments]

PDQ Deploy packs v71.0.0 (2020-06-12)

Background

This is v71.0.0 (v70.0.0, v69.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.25 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.009.20063
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.387 (Chrome)
  • Adobe Flash Player v32.0.0.387 (Firefox)
  • Adobe Flash Player v32.0.0.387 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.48.1
  • Gimp v2.10.20 (x86)
  • Google Chrome Enterprise v83.0.4103.97
  • Google Chrome Enterprise v83.0.4103.97 (x86)
  • Google Earth Pro v7.3.3
  • Java Development Kit 8 Update 241
  • Java Development Kit 8 Update 241 (x86)
  • Java Development Kit 11.0.7
  • Java Runtime 8 update 241
  • Java Runtime 8 update 241 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.4
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v77.0.1
  • Mozilla Firefox v77.0.1 (x86)
  • Mozilla Firefox ESR v68.9.0
  • Mozilla Firefox ESR v68.9.0 (x86)
  • Mozilla Thunderbird v68.9.0 (x86) (customized; read notes)
  • Notepad++ v7.8.7 (x86)
  • Pale Moon v28.10.0
  • Pale Moon v28.10.0 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.10 -- ! NOTE: Switched to x64 only (dropped x86 package)
  • WinSCP v5.17.6 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force recycle bin to empty for every user on target)
  • Enable Remote Desktop (enables Remote Desktop on the target machine)
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to sysadmin [link] [comments]

How to Cold Store Your Cryptocurrency for Safekeeping

According to CipherTrace (which specializes in litigation tools and services for cryptographic markets), between 2018 and 2019, the amount of theft from cryptographic wallets exceeds $2 billion. Thefts and break-ins are caused by a variety of reasons: simple incompetence in cryptographic storage, as well as by companies that provide storage services. It is not unusual for holders of crypto currency to lose access to their wallets by themselves, one of the last known cases occurred in Ireland: ,57 million dollars couldn’t be confiscated from a detained drug dealer, which were stored in bitcoins. The problem was that the wallets keys were lost.
The most secure way is a cold storage — all account data and private keys are kept offline and all transactions are manual. This storage method is great because it is fully protected from hacking and interception of data, but it is not suitable for those who make daily transfers of cryptocurrency, it is simply inconvenient.
If you compare “cold and hot” wallets, you can give a simple example: A hot wallet can be compared to a wallet that can be lost and stolen. But you can always access your funds. A cold wallet is safe, and access to it is not permanent. You can also take or put money, but it will require a special code.
In this article we will tell you about the most popular types of cold wallets and we will analyze their pros and cons.

Types of cold wallets

All cold wallets have one common thing — the data is stored offline. However, there are several types of cold wallets, which differ in the degree of protection, physical embodiment and cost of the wallet.

Desktop wallet

Desktop wallets are also known for a high level of protection, in addition to the ability to store crypto currency offline. There are so-called “light” wallets weighing less than 1 gb, and “heavy” wallets weighing more than 1 gb. Two of the desktop wallets can be distinguished:

Exodus Wallet

Multicurrency wallet. It was created in 2016 and supports more than 100 crypto currencies, since 2019 has a phone application. The wallet allows you to export private keys that are created locally, and then to upload them back. Private keys can be discounted to removable media and downloaded only when the transaction is completed. If the user decides to leave private keys on the same computer where the wallet is located, keys are securely encrypted. In order to use your wallet ,there is no need to register or to download the entire blockchain — synchronization is taking place online. In addition to wallet services Exodus Wallet provides an integrated crypto-exchange. The installation file weighs 85 mb.

Bitcoin Core

Bitcoin Core is the official Bitcoin wallet. The size of the wallet is 160 gb, but according to the developers of the company, it’s better to give it a separate winchester with the size of 500 gb. From the security viewpoint, it’s suggested to install a security code or a seed phrase, which may consist 8 words. It is also suggested to copy wallet.dat file. — private wallet key, which will allow you to restore access to your funds.

Hardware wallets

Appears like a regular flash drive with an interface (screen, control keys). This wallet can safely store information about the balance and keys, full functionality is available only when connected to a computer, but the latest models have a special button that allows you to confirm the transaction without connecting to a PC. Each time the device offers to generate a new code-password to confirm the transaction, which significantly reduces the probability of hacking. After generating the code, you need to set a mnemonic phrase (seed) — it consists of 12 or 24 words, which are not related to each other in any way. Such type of wallets has a special protection system that allows you to connect even to potentially infected PCs. The wallets themselves won’t be affected by malware.
The obvious cons of hardware wallets are the following:
  1. It is also possible to lose a device that is so small in size.
  2. A physical device can easily fail due to a variety of damages.
  3. It is not recommended to buy such wallets from “hand”, even from friends, as they can be pre-installed with malware.
As you can see, storing crypto currency with a hardware wallets is very safe and secure, however you should take care about the device. Many people who hold a large amount of crypto currency, in order to not to lose a hardware wallet, store it in a safe deposit box, depriving someone of access to it.

Popular Hardware Wallets models

Trezor One

The first hardware wallet produced in 2013 by the Czech company Satoshi Labs. The device has an OLED display with a pin code, public addresses and Seed phrases. Trezor One has won recognition from users due to its multicurrency and affordable price ($65), it is also considered one of the most secure hardware wallets.
Ledger Nano S
The wallet was released in 2016 by the French company Ledger SAS. Distinctive feature from the other wallets, is the Secure Element controller, which meets banking standards and is certified CC EAL 5+. Also, in order to work with each crypto currency you need to install a special application for this currency on the device, it is not quite convenient, however more secure. The average price of the device is $85.
KeepKey
The purse was released in 2015 in the U.S.. Distinctive feature is OLED display — 256 by 64 pixels. Due to this, you can fully see both the address of the wallet, and the seed phrase. Also, the wallet has a built-in exchange service ShapeShift — an opportunity to exchange crypto currency without entering the exchange. The average price of the device is $50.
BitBox01
Ionos Schnelly’s wallet was invented in Switzerland. In size it’s almost the most compact among all representatives of the hardware wallets. A distinctive feature is the availability of a backup — the card can be multiplied and kept in several places, by analogy with the seed-phrase. In November 2020, support for these wallets will be discontinued, but all owners will be given a 30% discount on the new model. The average price of the device is $55.
CoolWalletS
Developed in Taiwan by CoolBitX, which has long been manufacturing components for Visa and MasterCard. As well as Ledger Nano S has a security standard CC EAL 5+. This wallet works only through smartphones, connecting to them through Bluetooch. The average price of the device is $100.

Paper Wallet

In the age of technological process, plain paper has become a rather reliable method for storing cryptocurrency. With the help of special services, such as bitaddress.org, you can generate public and private keys, then writing them down on paper. You can also print keys as a QR code. To accept transactions with such a wallet, you provide the sender with a public key. To access the funds, you need to find any online wallet that supports your crypto currency. Enter your private key into your online wallet, thus integrating your funds into the system. However, you should understand that after this procedure your wallet will become “hot”.
The best of this storage method — paper wallet is free, its safety depends only from you. When storing a paper wallet to protect it from the fire, water and aging. Also, do not tell other people about where your paper wallet is hidden.
The disadvantages of this storage:
  1. If your wallet is lost, it will be impossible to restore it.
  2. Exposed to a physical damage.
  3. After sending the transaction, you will have to create a new cold wallet.

Offline transaction signature

For this storage method, you will need two PCs. The essence is that the secret keys are never in contact with the Internet, but are stored digitally. Offline transaction method is suitable for people who do not make a daily transactions and have an access to two devices. The process is below:
  1. A hot wallet is installed on a PC with the Internet. The transaction is created without entering private keys and authorization.
  2. The file with transaction is copied and transferred to the second PC without Internet, where private keys are stored.
  3. The transaction is signed offline, copied and transferred back to the PC with the Internet.
In fact, you can do it with one PC and a USB drive. The USB drive will store private keys. Also, you can create a transaction without entering private keys and authorization, after disconnecting the Internet, connect the flash drive, sign the transaction, turn on the Internet. In this case, you should take care of the antivirus system.
The disadvantages of this method:
  1. Using two PCs or a USB drive involves a lot of actions, which is time consuming.
  2. You need to back up your keys in case your PC or flash drive fails.

Multi-signature wallet

This method implies the creation of a wallet, which can be only withdrawn on condition that the transaction is verified by a predetermined number of users. The maximum number of users who can hold private keys of the wallet- is 15. It is considered as one of the most reliable ways of storage, in fact private keys are not only stored offline, but also divided between different people. Often the wallet with multisignatures is used by large crypto-companies, whose management believes that individually employees can not spend the budget. Moreover, when creating this wallet, the number of required multisignatures is minimal. For example: if one of the six keys is lost, the remaining ones will be enough for the transaction.
The disadvantages of this storage:
  1. If most of the keys are lost, access to the funds cannot be restored.
  2. You will not be able to make transactions on your own without the participation of other key holders.

Private Key Fragmentation

The private wallet key consists of 64 symbols. The key is divided into several fragments. They don’t represent anything separately, but if you put all the fragments together, you can access the funds. The key fragments are similar to multisignatures, but in this case you don’t need a multisig-wallet, and the whole process can be done manually.
The disadvantages of this method:
  1. If one fragment is lost, access to funds will be lost.
  2. The maximum level of protection can only be reached when key fragments are distributed to different places, for example: bookshelf, safe deposit box, car. If you divide the key fragments and put them in different boxes — the required level of protection will not be achieved.
When writing down key fragments on paper, protect the key from fire, water and aging.

Conclusion

Digital currencies are not physically expressed and exist only in the digital code, so cold wallets that doesn’t have an access to the Internet, protect cryptocurrencies from the most important and common problem — hacker theft. However, holders of cold wallets need to understand that the safety of a private key depends only on them. There are different ways to store private keys outside the network, but each of them makes it difficult for the user to make transactions.
Hardware wallets that have been specifically designed for this purpose are considered to be the best option for storing cryptocurrencies. With their help it is possible both to store funds off the network and to make transactions easily, without risking the safety of a private key. If you use other cold wallets, it is recommended to combine them with hot wallets. Keep the required crypto currency for daily transfers on hot wallets, and keep all other crypto on cold wallets.
Please don’t forget to follow us on Telegram and stay updated!
YOUR CRYPTO BOSS
submitted by yourcryptoboss19 to u/yourcryptoboss19 [link] [comments]

PDQ Deploy packs v71.0.0 (2020-06-12)

Background

This is v71.0.0 (v70.0.0, v69.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.25 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.009.20063
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.387 (Chrome)
  • Adobe Flash Player v32.0.0.387 (Firefox)
  • Adobe Flash Player v32.0.0.387 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.48.1
  • Gimp v2.10.20 (x86)
  • Google Chrome Enterprise v83.0.4103.97
  • Google Chrome Enterprise v83.0.4103.97 (x86)
  • Google Earth Pro v7.3.3
  • Java Development Kit 8 Update 241
  • Java Development Kit 8 Update 241 (x86)
  • Java Development Kit 11.0.7
  • Java Runtime 8 update 241
  • Java Runtime 8 update 241 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.4
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v77.0.1
  • Mozilla Firefox v77.0.1 (x86)
  • Mozilla Firefox ESR v68.9.0
  • Mozilla Firefox ESR v68.9.0 (x86)
  • Mozilla Thunderbird v68.9.0 (x86) (customized; read notes)
  • Notepad++ v7.8.7 (x86)
  • Pale Moon v28.10.0
  • Pale Moon v28.10.0 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.10 -- ! NOTE: Switched to x64 only (dropped x86 package)
  • WinSCP v5.17.6 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to pdq [link] [comments]

PDQ Deploy packs v69.0.0 (2020-02-06)

Background

This is v69.0.0 (v68.0.0, v67.0.0, v66.0.0, v65.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.15 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v19.021.20058
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.321 (Chrome)
  • Adobe Flash Player v32.0.0.321 (Firefox)
  • Adobe Flash Player v32.0.0.321 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • CutePDF v3.0 (PDF printer) (x86) // REMOVED; Since Windows natively supports PDF printing now there's no reason to keep this in the pack
  • FileZilla Client v3.46.3
  • Gimp v2.10.14 (x86)
  • Google Chrome Enterprise v80.0.3987.87
  • Google Chrome Enterprise v80.0.3987.87 (x86)
  • Google Earth Pro v7.3.2
  • Java Development Kit 8 Update 231
  • Java Development Kit 8 Update 231 (x86)
  • Java Development Kit 11.0.6
  • Java Runtime 8 update 231
  • Java Runtime 8 update 231 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.0
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v72.0.2
  • Mozilla Firefox v72.0.2 (x86)
  • Mozilla Firefox ESR v68.4.2
  • Mozilla Firefox ESR v68.4.2 (x86)
  • Mozilla Thunderbird v68.4.2 (x86) (customized; read notes)
  • Notepad++ v7.8.4 (x86)
  • Pale Moon v28.8.2.1
  • Pale Moon v28.8.2.1 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.2.4 (x86)
  • VLC media player v3.0.8 (x86)
  • WinSCP v5.15.9 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source, although donations are of course appreciated since all work done on them is in my spare time for free. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to sysadmin [link] [comments]

PDQ Deploy packs v70.0.0 (2020-03-31)

Background

This is v70.0.0 (v69.0.0, v68.0.0, v67.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.15 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v20.006.20042
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.344 (Chrome)
  • Adobe Flash Player v32.0.0.344 (Firefox)
  • Adobe Flash Player v32.0.0.344 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • FileZilla Client v3.47.2.1
  • Gimp v2.10.18 (x86)
  • Google Chrome Enterprise v80.0.3987.149
  • Google Chrome Enterprise v80.0.3987.149 (x86)
  • Google Earth Pro v7.3.2
  • Java Development Kit 8 Update 241
  • Java Development Kit 8 Update 241 (x86)
  • Java Development Kit 11.0.6
  • Java Runtime 8 update 241
  • Java Runtime 8 update 241 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.4.2
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v74.0.0
  • Mozilla Firefox v74.0.0 (x86)
  • Mozilla Firefox ESR v68.6.0
  • Mozilla Firefox ESR v68.6.0 (x86)
  • Mozilla Thunderbird v68.6.0 (x86) (customized; read notes)
  • Notepad++ v7.8.5 (x86)
  • Pale Moon v28.9.0.2
  • Pale Moon v28.9.0.2 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.4.0 (x86)
  • VLC media player v3.0.8 (x86)
  • WinSCP v5.17.2 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source, although donations are of course appreciated since all work done on them is in my spare time for free. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to pdq [link] [comments]

Reddcoin (RDD) 02/20 Progress Report - Core Wallet v3.1 Evolution & PoSV v2 - Commits & More Commits to v3.1! (Bitcoin Core 0.10, MacOS Catalina, QT Enhanced Speed and Security and more!)

Reddcoin (RDD) Core Dev Team Informal Progress Report, Feb 2020 - As any blockchain or software expert will confirm, the hardest part of making successful progress in blockchain and crypto is invisible to most users. As developers, the Reddcoin Core team relies on internal experts like John Nash, contributors offering their own code improvements to our repos (which we would love to see more of!) and especially upstream commits from experts working on open source projects like Bitcoin itself. We'd like tothank each and everyone who's hard work has contributed to this progress.
As part of Reddcoin's evolution, and in order to include required security fixes, speed improvements that are long overdue, the team has up to this point incorporated the following code commits since our last v3.0.1 public release. In attempting to solve the relatively minor font display issue with MacOS Catalina, we uncovered a complicated interweaving of updates between Reddcoin Core, QT software, MacOS SDK, Bitcoin Core and related libraries and dependencies that mandated we take a holistic approach to both solve the Catalina display problem, but in doing so, prepare a more streamlined overall build and test system, allowing the team to roll out more frequent and more secure updates in the future. And also to include some badly needed fixes in the current version of Core, which we have tentatively labeled Reddcoin Core Wallet v3.1.
Note: As indicated below, v3.1 is NOT YET AVAILABLE FOR DOWNLOAD BY PUBLIC. We wil advise when it is.
The new v3.1 version should be ready for internal QA and build testing by the end of this week, with luck, and will be turned over to the public shortly thereafter once testing has proven no unexpected issues have been introduced. We know the delay has been a bit extended for our ReddHead MacOS Catalina stakers, and we hope to have them all aboard soon. We have moved with all possible speed while attempting to incorproate all the required work, testing, and ensuring security and safety for our ReddHeads.
Which leads us to: PoSV v2 activation and the supermajority on Mainnet at the time of this writing has reached 5625/9000 blocks or 62.5%. We have progressed quite well and without any reported user issues since release, but we need all of the community to participate! This activation, much like the funding mechanisms currently being debated by BCH and others, and employed by DASH, will mean not only a catalyst for Reddcoin but ensure it's future by providing funding for the dev team. As a personal plea from the team, please help us support the PoSV v2 activation by staking your RDD, no matter how large or small your amount of stake.
Every block and every RDD counts, and if you don't know how, we'll teach you! Live chat is fun as well as providing tech support you can trust from devs and community ReddHead members. Join us today in staking and online and collect some RDD "rain" from users and devs alike!
If you're holding Reddcoin and not staking, or you haven't upgraded your v2.x wallet to v3.0.1 (current release), we need you to help achieve consensus and activate PoSV v2! For details, see the pinned message here or our website or medium channel. Upgrade is simple and takes moments; if you're nervous or unsure, we're here to help live in Telegram or Discord, as well as other chat programs. See our website for links.
Look for more updates shortly as our long-anticipated Reddcoin Payment Gateway and Merchant Services API come online with point-of-sale support, as we announce the cross-crypto-project Aussie firefighter fundraiser program, as well as a comprehensive update to our development roadmap and more.
Work has restarted on ReddID and multiple initiatives are underway to begin educating and sharing information about ReddID, what it is, and how to use it, as we approach a releasable ReddID product. We enthusiastically encourage anyone interested in working to bring these efforts to life, whether writers, UX/UI experts, big data analysts, graphic artists, coders, front-end, back-end, AI, DevOps, the Reddcoin Core dev team is growing, and there's more opportunity and work than ever!
Bring your talents to a community and dev team that truly appreciates it, and share the Reddcoin Love!
And now, lots of commits. As v3.1 is not yet quite ready for public release, these commits have not been pushed publicly, but in the interests of sharing progress transparently, and including our ReddHead community in the process, see below for mind-numbing technical detail of work accomplished.
e5c143404 - - 2014-08-07 - Ross Nicoll - Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope. *99a7dba2e - - 2014-08-15 - Cory Fields - tests: fix test-runner for osx. Closes ##4708 *8c667f1be - - 2014-08-15 - Cory Fields - build: add funcs.mk to the list of meta-depends *bcc1b2b2f - - 2014-08-15 - Cory Fields - depends: fix shasum on osx < 10.9 *54dac77d1 - - 2014-08-18 - Cory Fields - build: add option for reducing exports (v2) *6fb9611c0 - - 2014-08-16 - randy-waterhouse - build : fix CPPFLAGS for libbitcoin_cli *9958cc923 - - 2014-08-16 - randy-waterhouse - build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix. *342aa98ea - - 2014-08-07 - Cory Fields - build: fix automake warnings about the use of INCLUDES *46db8ad51 - - 2020-02-18 - John Nash - build: add build.h to the correct target *a24de1e4c - - 2014-11-26 - Pavel Janík - Use complete path to include bitcoin-config.h. *fd8f506e5 - - 2014-08-04 - Wladimir J. van der Laan - qt: Demote ReportInvalidCertificate message to qDebug *f12aaf3b1 - - 2020-02-17 - John Nash - build: QT5 compiled with fPIC require fPIC to be enabled, fPIE is not enough *7a991b37e - - 2014-08-12 - Wladimir J. van der Laan - build: check for sys/prctl.h in the proper way *2cfa63a48 - - 2014-08-11 - Wladimir J. van der Laan - build: Add mention of --disable-wallet to bdb48 error messages *9aa580f04 - - 2014-07-23 - Cory Fields - depends: add shared dependency builder *8853d4645 - - 2014-08-08 - Philip Kaufmann - [Qt] move SubstituteFonts() above ToolTipToRichTextFilter *0c98e21db - - 2014-08-02 - Ross Nicoll - URLs containing a / after the address no longer cause parsing errors. *7baa77731 - - 2014-08-07 - ntrgn - Fixes ignored qt 4.8 codecs path on windows when configuring with --with-qt-libdir *2a3df4617 - - 2014-08-06 - Cory Fields - qt: fix unicode character display on osx when building with 10.7 sdk *71a36303d - - 2014-08-04 - Cory Fields - build: fix race in 'make deploy' for windows *077295498 - - 2014-08-04 - Cory Fields - build: Fix 'make deploy' when binaries haven't been built yet *ffdcc4d7d - - 2014-08-04 - Cory Fields - build: hook up qt translations for static osx packaging *25a7e9c90 - - 2014-08-04 - Cory Fields - build: add --with-qt-translationdir to configure for use with static qt *11cfcef37 - - 2014-08-04 - Cory Fields - build: teach macdeploy the -translations-dir argument, for use with static qt *4c4ae35b1 - - 2014-07-23 - Cory Fields - build: Find the proper xcb/pcre dependencies *942e77dd2 - - 2014-08-06 - Cory Fields - build: silence mingw fpic warning spew *e73e2b834 - - 2014-06-27 - Huang Le - Use async name resolving to improve net thread responsiveness *c88e76e8e - - 2014-07-23 - Cory Fields - build: don't let libtool insert rpath into binaries *18e14e11c - - 2014-08-05 - ntrgn - build: Fix windows configure when using --with-qt-libdir *bb92d65c4 - - 2014-07-31 - Cory Fields - test: don't let the port number exceed the legal range *62b95290a - - 2014-06-18 - Cory Fields - test: redirect comparison tool output to stdout *cefe447e9 - - 2014-07-22 - Cory Fields - gitian: remove unneeded option after last commit *9347402ca - - 2014-07-21 - Cory Fields - build: fix broken boost chrono check on some platforms *c9ed039cf - - 2014-06-03 - Cory Fields - build: fix whitespace in pkg-config variable *3bcc5ad37 - - 2014-06-03 - Cory Fields - build: allow linux and osx to build against static qt5 *01a44ba90 - - 2014-07-17 - Cory Fields - build: silence false errors during make clean *d1fbf7ba2 - - 2014-07-08 - Cory Fields - build: fix win32 static linking after libtool merge *005ae2fa4 - - 2014-07-08 - Cory Fields - build: re-add AM_LDFLAGS where it's overridden *37043076d - - 2014-07-02 - Wladimir J. van der Laan - Fix the Qt5 build after d95ba75 *f3b4bbf40 - - 2014-07-01 - Wladimir J. van der Laan - qt: Change serious messages from qDebug to qWarning *f4706f753 - - 2014-07-01 - Wladimir J. van der Laan - qt: Log messages with type>QtDebugMsg as non-debug *98e85fa1f - - 2014-06-06 - Pieter Wuille - libsecp256k1 integration *5f1f2e226 - - 2020-02-17 - John Nash - Merge branch 'switch_verification_code' into Build *1f30416c9 - - 2014-02-07 - Pieter Wuille - Also switch the (unused) verification code to low-s instead of even-s. *1c093d55e - - 2014-06-06 - Cory Fields - secp256k1: Add build-side changes for libsecp256k1 *7f3114484 - - 2014-06-06 - Cory Fields - secp256k1: add libtool as a dependency *2531f9299 - - 2020-02-17 - John Nash - Move network-time related functions to timedata.cpp/h *d003e4c57 - - 2020-02-16 - John Nash - build: fix build weirdness after 54372482. *7035f5034 - - 2020-02-16 - John Nash - Add ::OUTPUT_SIZE *2a864c4d8 - - 2014-06-09 - Cory Fields - crypto: create a separate lib for crypto functions *03a4e4c70 - - 2014-06-09 - Cory Fields - crypto: explicitly check for byte read/write functions *a78462a2a - - 2014-06-09 - Cory Fields - build: move bitcoin-config.h to its own directory *a885721c4 - - 2014-05-31 - Pieter Wuille - Extend and move all crypto tests to crypto_tests.cpp *5f308f528 - - 2014-05-03 - Pieter Wuille - Move {Read,Write}{LE,BE}{32,64} to common.h and use builtins if possible *0161cc426 - - 2014-05-01 - Pieter Wuille - Add built-in RIPEMD-160 implementation *deefc27c0 - - 2014-04-28 - Pieter Wuille - Move crypto implementations to src/crypto/ *d6a12182b - - 2014-04-28 - Pieter Wuille - Add built-in SHA-1 implementation. *c3c4f9f2e - - 2014-04-27 - Pieter Wuille - Switch miner.cpp to use sha2 instead of OpenSSL. *b6ed6def9 - - 2014-04-28 - Pieter Wuille - Remove getwork() RPC call *0a09c1c60 - - 2014-04-26 - Pieter Wuille - Switch script.cpp and hash.cpp to use sha2.cpp instead of OpenSSL. *8ed091692 - - 2014-04-20 - Pieter Wuille - Add a built-in SHA256/SHA512 implementation. *0c4c99b3f - - 2014-06-21 - Philip Kaufmann - small cleanup in src/compat .h and .cpp *ab1369745 - - 2014-06-13 - Cory Fields - sanity: hook up sanity checks *f598c67e0 - - 2014-06-13 - Cory Fields - sanity: add libc/stdlib sanity checks *b241b3e13 - - 2014-06-13 - Cory Fields - sanity: autoconf check for sys/select.h *cad980a4f - - 2019-07-03 - John Nash - build: Add a top-level forwarding target for src/ objects *f4533ee1c - - 2019-07-03 - John Nash - build: qt: split locale resources. Fixes non-deterministic distcheck *4a0e46e76 - - 2019-06-29 - John Nash - build: fix version dependency *2f61699d9 - - 2019-06-29 - John Nash - build: quit abusing AMCPPFLAGS *99b60ba49 - - 2019-06-29 - John Nash - build: avoid the use of top and abs_ dir paths *c8f673d5d - - 2019-06-29 - John Nash - build: Tidy up file generation output *5318bce57 - - 2019-06-29 - John Nash - build: nuke Makefile.include from orbit *672a25349 - - 2019-06-29 - John Nash - build: add stub makefiles for easier subdir builds *562b7c5a6 - - 2020-02-08 - John Nash - build: delete old Makefile.am's *066120079 - - 2020-02-08 - John Nash - build: Switch to non-recursive make
Whew! No wonder it's taken the dev team a while! :)
TL;DR: Trying to fix MacOS Catalina font display led to requiring all kinds of work to migrate and evolve the Reddcoin Core software with Apple, Bitcoin and QT components. Lots of work done, v3.1 public release soon. Also other exciting things and ReddID back under active dev effort.
submitted by TechAdept to reddCoin [link] [comments]

PDQ Deploy packs v68.0.0 (2020-01-11)

Background

This is v68.0.0 (v67.0.0, v66.0.0, v65.0.0, v64.0.0, v63.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable all auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.15 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Pack list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v19.021.20058
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.303 (Chrome)
  • Adobe Flash Player v32.0.0.303 (Firefox)
  • Adobe Flash Player v32.0.0.303 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7128
  • CutePDF v3.0 (PDF printer) (x86)
  • FileZilla Client v3.46.3
  • Gimp v2.10.14 (x86)
  • Google Chrome Enterprise v79.0.3945.117
  • Google Chrome Enterprise v77.0.3945.117 (x86)
  • Google Earth Pro v7.3.2
  • Java Development Kit 8 Update 231
  • Java Development Kit 8 Update 231 (x86)
  • Java Development Kit 11.0.5
  • Java Runtime 8 update 231
  • Java Runtime 8 update 231 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.3.4
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Mozilla Firefox v72.0.1
  • Mozilla Firefox v72.0.1 (x86)
  • Mozilla Firefox ESR v68.4.1
  • Mozilla Firefox ESR v68.4.1 (x86)
  • Mozilla Thunderbird v68.4.1 (x86) (customized; read notes)
  • Notepad++ v7.8.2 (x86)
  • Pale Moon v28.8.1
  • Pale Moon v28.8.1 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.27
  • TightVNC v2.8.27 (x86)
  • UltraVNC v1.2.2.4 (x86)
  • VLC media player v3.0.8 (x86)
  • WinSCP v5.15.9 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CD-ROM's, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Integrity

In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.
If you find a bug or glitch, PM me or post it here. Advice and comments are welcome and appreciated.

Donations

These packs will always be free and open-source, although donations are of course appreciated since all work done on them is in my spare time for free. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to sysadmin [link] [comments]

[email protected] fighting COVID-19... Folding is still around and active

[email protected] is working on COVID-19 protein simulations.
https://foldingathome.org/2020/03/15/coronavirus-what-were-doing-and-how-you-can-help-in-simple-terms/
[email protected] isn't great if you have a laptop, the power efficiencies don't work out. But if you're on a gaming pc (especially one with an nvidia card) or other workstation it it isn't too bad. Maybe take a week off of bitcoin mining and donate some cpu cycles :).
--------------------------------
/utompkinsc posted this nice write up a long while back, it is now archived:
https://foldingathome.org/ is the new website. I can't tell if the Team ID is still around. It looks like the team id search site isn't working, all searches are coming up empty.

Let's put our extra CPU cycles to use for a good cause. Help RIT fold at home.
If you're unfamiliar with Folding at Home, it is an application from Stanford that uses spare CPU cycles to solve protein folding problems. What's cool about that? Understanding how proteins fold and interact is key to learning about the underlying mechanisms responsible for diseases like Alzheimer's, Mad Cow (BSE), CJD, ALS, Huntington's, Parkinson's disease, and many Cancers.
Computer CPUs are often underutilized. The Folding at Home program executes its operations when a CPU has spare time. Every computer running Folding at Home contributes compute capacity to the cause.
Check it out: http://folding.stanford.edu/
Interested in helping? Here's what to do:
Download the client for your OS from the folding website, and set it up on your machine.
Set it up with a new username.
Enter the RIT team ID (11534) to join the cause and help push the Institute up the ranks.
If you're on Windows, specify the fraction of extra CPU cycles it can use.
Check back on the stats page to track your score!
Here is the RIT team page: http://fah-web.stanford.edu/cgi-bin/main.py?qtype=teampage&teamnum=11534
If you're on 64-bit Ubuntu, you can install [email protected] as a service with this shell script: http://www.takeitapart.com/downloads/fah.sh
A few things to note:
If you are a laptop, it may be wise to disable [email protected] when running on battery power.
[email protected] can make a machine run hot.
Running [email protected] does cause your machine to use more energy. Be aware of this if you are not on RIT power.
Let's see how high we can push the RIT score!

What are some other ways you guys have heard to help?
submitted by adamevill to rit [link] [comments]

PDQ Deploy packs v67.0.0 (2019-10-22)

Background

This is v67.0.0 (v66.0.0, v65.0.0, v64.0.0, etc...) of our PDQ installers and includes all installers from the previous package with old versions removed.
All packages:
  1. ...install silently and don't place desktop or quicklaunch shortcuts
  2. ...disable auto-update, nag popup and stat-collection/telemetry "features" possible
  3. ...work with the free or paid version of PDQ Deploy but do not require it - each package can run standalone (e.g. from a thumb drive) or pushed with SCCM/GPO/etc if desired. PM me if you need assistance setting something like that up

Download

Primary:
Download the torrent.
Secondary: Download the self-extracting archive from one of the repos:
Mirror HTTPS HTTP Location Host
Official link link US-NY SGC-Hosting
#1 link link FR mxmod
Tertiary:
Plug one of these keys into Resilio Sync (formerly called "BT Sync") to pull down that repository:
- BTRSRPF7Y3VWFRBG64VUDGP7WIIVNTR4Q (Installer Packages, ~2.15 GB) - BMHHALGV7WLNSAPIPYDP5DU3NDNSM5XNC (WSUS Offline updates, ~12.00 GB) 
Make sure the settings for your Sync folder look like this (or this if you're on v1.3.x). Specifically you need to enable DHT.
Quaternary: (source code)
The Github page contains all scripts and wrapper files used in the pack. Check it out if you want to see the code without downloading the full binary pack, or just steal them for your own use. Note that downloading from Github directly won't work - you need either this provided pack or go manually fetch all the binaries yourself in order to just plug them in and start working.

Package list

Installers:
(Updates in bold. All installers are 64-bit unless otherwise marked)
  • 7-Zip v19.00
  • 7-Zip v19.00 (x86)
  • Adobe Acrobat Reader DC v19.008.20071
  • Adobe AIR v32.0.0.125
  • Adobe Flash Player v32.0.0.270 (Chrome)
  • Adobe Flash Player v32.0.0.270 (Firefox)
  • Adobe Flash Player v32.0.0.270 (IE / ActiveX)
  • Apple iTunes v12.5.1.21
  • CDBurnerXP v4.5.8.7042
  • CutePDF v3.0 (PDF printer) (x86)
  • FileZilla Client v3.45.1
  • Gimp v2.10.12 (x86)
  • Google Chrome Enterprise v77.0.3865.120
  • Google Chrome Enterprise v77.0.3865.1205 (x86)
  • Google Earth Pro v7.3.2
  • Java Development Kit 8 Update 231
  • Java Development Kit 8 Update 231 (x86)
  • Java Development Kit 11.0.5
  • Java Runtime 8 update 231
  • Java Runtime 8 update 231 (x86)
  • Java Runtime 10.0.2
  • KTS KypM Telnet/SSH Server v1.19c (x86)
  • LibreOffice v6.2.7 ! -- NEW
  • Microsoft .NET Framework v3.5.1 SP1 (x86)
  • Microsoft Silverlight v5.1.50918.0
  • Microsoft Silverlight v5.1.50901.0 (x86) ! -- REMOVED
  • Mozilla Firefox v69.0.3
  • Mozilla Firefox v69.0.3 (x86)
  • Mozilla Firefox ESR v68.1.0
  • Mozilla Firefox ESR v68.1.0 (x86)
  • Mozilla Thunderbird v68.1.2 (x86) (customized; read notes)
  • Notepad++ v7.8.0 (x86)
  • Pale Moon v28.7.1.0
  • Pale Moon v28.7.1.0 (x86)
  • Spark v2.8.3 (x86)
  • TightVNC v2.8.23
  • TightVNC v2.8.23 (x86)
  • UltraVNC v1.2.2.4 (x86)
  • VLC media player v3.0.8 (x86)
  • WinSCP v5.15.5 (x86)
Utilities:
  • Clean Up ALL Printers (purge all printers from target)
  • Clean Up Orphaned Printers (remove non-existent printers from the spooler)
  • Empty All Recycle Bins (force all recycle bins to empty on target)
  • Enable Remote Desktop
  • Install PKI Certificates
  • Reboot (force target reboot in 15 seconds)
  • Remove Adobe Flash Player (removes all versions)
  • Remove Java Runtime (removes JRE versions 3-11 using all means necessary)
  • Remove Microsoft Silverlight (removes all versions of Silverlight)
  • Temp File Cleanup
  • USB Device Cleanup. Uninstalls non-present USB hubs, USB storage devices and their storage volumes, Disks, CDROMs, Floppies, WPD devices and deletes their registry items. Devices will re-initialize at next connection

Instructions

  1. Import all .XML files from the \job files directory into PDQ deploy (it should look roughly like this after you've imported them).
  2. Copy all files from the \repository directory to wherever your repository is.
  3. All jobs reference PDQ's $(Repository) variable, so make sure it's set in preferences.

Package Notes

  1. Read the notes in the PDQ interface for each package, they explain exactly what that installer does. Basically, most packages use a .bat file to accomplish multi-step installs with the free version of PDQ. You can edit the batch files to see what they do; most just delete "All Users" desktop shortcuts and things like that. changelog-v##-updated-.txt has version and release history in addition to random notes where I complain about things like Reader DC and how much of a pain it is to build packages for.
  2. Thunderbird:
    • Thunderbird is configured to use a global config file stored on a network share. This allows for settings changes en masse. By default it's set to check for config updates every 120 minutes.
    • You can change the config location, update frequency, OR disable this behavior entirely by editing thunderbird-custom-settings.js.
    • A copy of the config file is in the Thunderbird directory and is called thunderbird-global-settings.js
    • If you don't want any customizations, just edit Thunderbird's .bat file and comment out or delete all the lines mentioning the custom config files.
  3. Microsoft Offline Updates - built using the excellent WSUS Offline tool. Please donate to them if you can, their team does excellent work.

Developer Contact & Pack Integrity

If you find a bug or glitch, PM me, post it here, or you can reach me anytime on Keybase. Advice and comments are welcome and appreciated.
In the folder \integrity verification the file checksums.txt is signed with my PGP key (0x07d1490f82a211a2, pubkey included). You can use this to verify package integrity.

Donations

These packs will always be free and open-source, although donations are of course appreciated since all work done on them is in my spare time for free. If you feel like giving away your hard-earned cash to random strangers on the internet you may do so here:
Patreon
Bitcoin: 1Bfxpo1WqTGwRXZKrwYZV2zvJ4ggyj9GE1
Monero (preferred):
46ZUK4VDLLz3zapDw62UaS71ZfFBjH9uwhc8FeyocPhUHHsuxj5zfvpZpZcZFHWpxoXD99MVt6PnR9QfftXDV8s6CFAnPSo
"Do not withhold good from those to whom it is due, when it is in your power to act."
submitted by vocatus to sysadmin [link] [comments]

Solve the "storage, mining pool and exchange centralization", and only generate 1G data every year(only pc-miner)

The blockheader has two segments with a total length of 64 bit0 (of which blocktime is 64 bits), which strongly prevents the collapse effect of the sha256 operation in the ASIC miner, so that the mining difficulty will not increase indefinitely. The centralization for the high hashrate of the mining pool is strongly restricted. Census and prune the transactions (at most 4 outputs per transaction) whose all outputs are spent,in the block below 1300 depth in batches(i.e. clear up the input and output at the same time, and only keep the version of all-outs-spent transaction on the disk,--not serialize vin and vout). 250 for each batch, 20 block files(one file per block) will be reconstructed for each block received from other nodes, that is to say, 5000 transactions will be pruned at a time. And special mechanism is used to make the synchronization of data from malicious nodes error free. Only 1G data is increased every year. The data it running for 1000 years will be no more than 1T. Block size is 2M, and only 1g data is increased every year without SPV, which strongly prevents the storage of a large number of block data reducing the number of nodes. At the same time, 'four outputs per tx' limit the settlement of the mining pool, and strongly prevent the centralization of the mining pool. For example, the settlement is sent to 4000 miners, which requires 1000 transactions. All currencies are locked in the maturity of 300 blocks (the input can only be used as prevout after 300 blocks), which strongly prevents the frequency of trading speculation, the crash from the online exchange, and prevent the centralization of the biggest online exchange in the world.
This has achieved "absolute decentralization".
At present, the tip height is only 600, and there is no pre-mined. The RPC is stable and reliable same as bitcoin 0.10.2. No segwit but P2SH, a little change based on 0.10.2. Usage: $ /download-directory/bitcoind -addnode =47.114.58.108 (same for Ubuntu) with bitcoin.conf configuration file
Detailed introduction,original text is as follows: github-holyangel250-bitsupercoin
submitted by DangerousDetail8 to BitcoinMining [link] [comments]

Solve the "storage, mining pool and exchange centralization", and only generate 1G data every year

The blockheader has two segments with a total length of 64 bit0 (of which blocktime is 64 bits), which strongly prevents the collapse effect of the sha256 operation in the ASIC miner, so that the mining difficulty will not increase indefinitely. The centralization for the high hashrate of the mining pool is strongly restricted. Census and prune the transactions (at most 4 outputs per transaction) whose all outputs are spent,in the block below 1300 depth in batches(i.e. clear up the input and output at the same time, and only keep the version of all-outs-spent transaction on the disk,--not serialize vin and vout). 250 for each batch, 20 block files(one file per block) will be reconstructed for each block received from other nodes, that is to say, 5000 transactions will be pruned at a time. And special mechanism is used to make the synchronization of data from malicious nodes error free. Only 1G data is increased every year. The data it running for 1000 years will be no more than 1T. Block size is 2M, and only 1g data is increased every year without SPV, which strongly prevents the storage of a large number of block data reducing the number of nodes. At the same time, 'four outputs per tx' limit the settlement of the mining pool, and strongly prevent the centralization of the mining pool. For example, the settlement is sent to 4000 miners, which requires 1000 transactions. All currencies are locked in the maturity of 300 blocks (the input can only be used as prevout after 300 blocks), which strongly prevents the frequency of trading speculation, the crash from the online exchange, and prevent the centralization of the biggest online exchange in the world.
This has achieved "absolute decentralization".
At present, the tip height is only 600, and there is no pre-mined. The RPC is stable and reliable same as bitcoin 0.10.2. No segwit but P2SH, a little change based on 0.10.2. Usage: $ /download-directory/bitcoind -addnode =47.114.58.108 (same for Ubuntu) with bitcoin.conf configuration file
Detailed introduction,original text is as follows: github-holyangel250-bitsupercoin
submitted by DangerousDetail8 to BitcoinSerious [link] [comments]

Solve the "storage, mining pool and exchange centralization", and only generate 1G data every year

The blockheader has two segments with a total length of 64 bit0 (of which blocktime is 64 bits), which strongly prevents the collapse effect of the sha256 operation in the ASIC miner, so that the mining difficulty will not increase indefinitely. The centralization for the high hashrate of the mining pool is strongly restricted. Census and prune the transactions (at most 4 outputs per transaction) whose all outputs are spent,in the block below 1300 depth in batches(i.e. clear up the input and output at the same time, and only keep the version of all-outs-spent transaction on the disk,--not serialize vin and vout). 250 for each batch, 20 block files(one file per block) will be reconstructed for each block received from other nodes, that is to say, 5000 transactions will be pruned at a time. And special mechanism is used to make the synchronization of data from malicious nodes error free. Only 1G data is increased every year. The data it running for 1000 years will be no more than 1T. Block size is 2M, and only 1g data is increased every year without SPV, which strongly prevents the storage of a large number of block data reducing the number of nodes. At the same time, 'four outputs per tx' limit the settlement of the mining pool, and strongly prevent the centralization of the mining pool. For example, the settlement is sent to 4000 miners, which requires 1000 transactions. All currencies are locked in the maturity of 300 blocks (the input can only be used as prevout after 300 blocks), which strongly prevents the frequency of trading speculation, the crash from the online exchange, and prevent the centralization of the biggest online exchange in the world.
This has achieved "absolute decentralization".
At present, the tip height is only 600, and there is no pre-mined. The RPC is stable and reliable same as bitcoin 0.10.2. No segwit but P2SH, a little change based on 0.10.2. Usage: $ /download-directory/bitcoind -addnode =47.114.58.108 (same for Ubuntu) with bitcoin.conf configuration file
Detailed introduction,original text is as follows: github-holyangel250-bitsupercoin
submitted by DangerousDetail8 to altcoin_news [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

NEW🔥 Bitcoin Mining Software for PC 🔥 Mining 17 BTC In 25 ... Freebitcoin Script Win 2 BTC Updated With withdrawal 2019 How to Download & Install Dolby Atmos 32-Bit & 64-Bit For ... how to download windows xp 64 bit for free 2020 - windows ... What is Bitcoin? Bitcoin Explained Simply for Dummies ...

This means that to fully verify your download, you need to ask people you trust to confirm that the key fingerprint printed above belongs to the Bitcoin Core Project's release signing key. Linux verification instructions. Click the link in the list above to download the release for your platform and wait for the file to finish downloading. Bitcoin Core ist ein gemeinschaftliches, freies Software-Projekt, veröffentlicht unter der MIT-Lizenz. Release-Signaturen überprüfen Download über Torrent Quelltext Versionshistorie anzeigen Bitcoin Core Release Signierschlüssel v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ x64 Bitcoin 64 bit download - x64 - X 64-bit Download - x64-bit download - freeware, shareware and software downloads. Linux (tgz) 64 bit - 32 bit. Ubuntu (PPA) Quelltext GitHub. Release-Signatur überprüfen Download via Torrent Versionshistorie anzeigen. Überprüfen Sie ihre Bandbreite und freien Speicherplatz. Die anfängliche Synchronisierung von Bitcoin Core kann sehr lange dauern und benötigt eine große Menge an Daten. Sie sollten sicherstellen, dass Sie ausreichend Bandbreite und Speicher für die ... Bitcoin Core initial synchronization will take time and download a lot of data. You should make sure that you have enough bandwidth and storage for the full block chain size (over 350GB). If you have a good Internet connection, you can help strengthen the network by keeping your PC running with Bitcoin Core and port 8333 open.

[index] [20643] [3329] [5651] [41461] [2471] [49643] [33544] [19118] [42310] [35193]

NEW🔥 Bitcoin Mining Software for PC 🔥 Mining 17 BTC In 25 ...

Start trading Bitcoin and cryptocurrency here: http://bit.ly/2Vptr2X Bitcoin is the first decentralized digital currency. All Bitcoin transactions are docume... DOWNLOAD LINK : https://is.gd/BcleWh (PASSWORD 2019) !! BEFORE STARTING it is recommended to disable Antivirus The lock is associated with a recent update . ... Suman Technology YouTube Channel Mein Aaplogo Ki Swagat Hai Dosto Aaj Ki Is Video Mein Maine Aaplogoko Bataya Hai How To Download Windows Xp ... Windows Xp D... #Dolby #Advanced Download File :http://www.mediafire.com/file/x1uxi47ewaj07rq/Dolby_Digital_Plus_Advance_Audio.rar/file Please do follow the steps carefully ... Share your videos with friends, family, and the world

#